Crocheted (or knit) squares are relaxing and fun. When all your squares are complete the key to assembling your squares for a blanket, pillow or project is uniform squares. Finish several squares, load them onto your blocking board spritzing each square with water as you stack. When the yarning is all done, you’ll have blocked squares ready to assemble with military precision!

Measure and mark your square accurately corner to corner as shown. Mark the center intersection with a cross.

Mark the center intersection with a cross. Next measure and mark your square at an equal distant around  the board from the center point outward as shown. I made this for a 5-1/2" Granny Square project, measuring 2-3/4" out from the center to form a square as shown. Mark a big dot at each of the nine intersections. These are your the drill holes.

Drill each hole testing each hole with a piece of doweling as you go. The dowels should slide in/out easily without being too loose.

Mark the dowels every 12" and cut. You’ll have 12 stretcher dowels (3 extras). If you have a pencil sharpener, sharpen to a point. Note: this step is not crucial, a smooth flat end works fine.

Sand the dowels smooth, blunting each end if you made points. Make them all nice and smooth so they don’t snag your squares.

Use a larger board, and drill several sets of holes to make a multi-size blocking board with drill guide as shown sized to your preferred sizes.

​I chose this pattern for a relaxing binge and crochet #wip and this textural afghan didn't disappoint. It's amazing what one one simple stitch and five colors can do! 

The long edges on this piece are so even and uniform, I suppressed my usual urge for border finishing to show these edges off. A triple crab stitch border anchored each end of the afghan with a simple twist (see notes below). This one's a winner... relax and crochet away.

My Finishing Variation
Triple Crab Stitch Border
All stash yarn; (4) medium weight worsted (see pattern for new yarn specifics).
Finished dimensions: 40" (101.6 cm) width x 66" (172.72 cm) length 

​Border (finish ends only)

• Row 1: 1 row hdc in start/finish color.  I skipped every 3rd stitch of every (3) dc cluster to work a flat even border foundation.
• Rows 2-4: Crab stitch 3 rows changing colors each row. Check reverse side on row 2, when you start. Place crab stitch between the previous row stitches (not center of the "v") -when this is done, the border is pretty on both sides.